YONGNUO YN-E3-RTファームウェアのアップデート方法
久しぶりにYN-E3-RTを引っ張り出してきました。
YN-E3-RTとは?
Yongnuoから発売されているスピードライトトランスミッターです。同社のストロボのYONGNUO YN600EX-RTを遠隔でコントロールできるのはもちろんのこと、なんとCANON純正のスピードライト600EX II-RTまで操作できるっていうんだから、そりゃパクリすぎだ!wwという感じの商品。
今回手持ちの580EX Ⅱが球切れしてしまったこともあり、スピードライト600EX II-RTを入手したのでようやくこれを使うことができるなと思いYN-E3-RTを引っ張り出してきたというわけです。
公式サイトを見ているとファームウェアの最新版がでていたので、こりゃ使い始める前にアップデートしてみるかと思いアップデートの手順を記載しておきます。
YN-E3-RTファームウェアのアップデート方法
ファームウェアのアップデート方法が英語で記載されていたので、日本語訳してみました。
- 1. YN-E3-RTを初めてアップグレードする準備のために、ドライバ&ソフトウエアパッケージ「YN_Trigger_Updater.zip」をダウンロードします。解凍して「YN_Trigger_Updater_Setup.exe」を起動し、ソフトウエアとドライバをインストールしてください。
- 2. ファームウェアの最新版をダウンロードして解凍してください。
- 3. YN-E3-RTのモードボタンを押したまま、電源を一度OFFにしてからもう一度ONにします。そうすると液晶画面には”YN-E3-RT Firmware Upgrade”と表示されます。YN-E3-RT本体をUSBケーブルでパソコンに接続してください
- 4. YN_Trigger_Updaterソフトを起動します。"Browse…"ボタンを起動して、ステップ2で解凍したファームウェアを選択します。YN-E3-RTが接続されたことの確認を待って、"Update"ボタンを押します。アップデートが終了すると、YN-E3-RTは自動的にリセットされて復帰するはずです。
- 5. アップデートのときにトラブルが生じたら、YN-E3-RTの電源を切り、もう一度ステップ3から試してみてください。
以上になります。お疲れ様でした!
楽しいストロボ多灯ライフをお送りください
【公式サイト】
http://www.hkyongnuo.com/e-detaily.php?ID=337【YN-E3-RTの公式ページ】
http://www.hkyongnuo.com/e-detaily.php?ID=337
ファームウェアのアップデート履歴です。
直前のアップデートではEOS-Mに対応したものだったようですね。
2017.07.20 v1.24:
Fixed: compatible with EOS-M series mirrorless digital camera.
2017.02.20 v1.23:
Fixed: ETTL/GR Over exposure with 80d
Fixed: v1.22 ETTL/GR mode didn’t work correctly.2015.12.07 v1.21:
Fixed: Free Mask PFN bug.
2015.12.03 v1.20:
Fixed: Some LCD screen won’t display after waking up.
2015.10.22 v1.19:
Improved: Compatibility with 7D + YNE3-RX/580EX II
Fixed: Compatibility with Canon 430EX III-RT2015.07.01 v1.18:
Fixed: adjusted for new LCD/PCB design. (Please don’t update old firmwares
with YN-E3 assembled after 2015/07/01, or the lcd won’t display correctly. If
you have done that, please update with v1.18 again.)2015.05.13 v1.17:
Fixed: Shutter Release didn’t work with 7D Mk II.
2015.04.07 v1.16:
Fixed: can’t trigger remote camera in link shot master mode.
2015.02.09 v1.15:
Fixed: Compatibility with YNE3-RX & YN565EX
Version 1.14:
Fixed: Compatibility with YNE3-RX
Fixed: FEL didn’t work on 7D IIVersion 1.13:
Fixed: improved performance.
Version 1.12:
Fixed: sometimes recycle information is missing
Version 1.11:
Fixed: reduced power consumption.
Fixed: imporved radio performance.Version 1.10:
Fixed: couldn’t set fec of group b/d via camera menu.
Version 1.09:
Fixed: update limit of flash number in Multi mode.
Fixed: disable HSS in multi mode
Added: P.FN: legacy trigger mode. When it’s set, YN-E3-RT won’t detect ettl
input so that it can be used on Fuji hotshoes.
Added: P.FN: Free Mask Group. This setting is used with GR/*. Free mask will
be on/off when you hold GR/* button for a few seconds. When Free mask is on,
groups not in this setting won’t fire. So you can take a photo with background
flashes only quickly.Version 1.08:
Fixed: correct ettl2/gr exposure for 1D-X.
Fixed: improved light metering for cameras after 2012.Version 1.07:
Fixed: When one of the group is set to ETTL mode, if one of the flash is not
recycled, it may make a full output flash due to incorrect light metering. Now
YN-E3-RT won’t trigger a flash in such a situation. Note: if the group is set
to M mode, a flash will be triggered no matter it is recycled or not.Fixed: improved flash syncing with cameras after 2012.
Added: Legacy flash trigger (for non canon cameras). Now you can use YN-E3-RT
on non canon cameras with standard iso hot shoe. You need to press the
test button to transfer the M mode parameters. supports canon 600ex-rt as
slave flashes only.Version 1.06:
Fixed: Incorrect Exposure for GR mode on cameras before 2012, when one of the group is set to M mode.
Added: Version information display on menu4.Version 1.05:
Fixed: Compatible issue with 5D Mark III/6D/70D/650D.
ディスカッション
コメント一覧
まだ、コメントがありません